Product introduction

BRAND: SBRMM

Hand-push Thermoplastic Road Marking Machine shall be used together with hot melt kettle. It has the characteristics of quality marking with speed, flexible operation and easy maintenance, etc.

Features:

1,  Simple designed and easy maintenance

2,  Marking different widths of road lines after replace the different marking screed shoes.

3,  Equipped with high precision special cast iron marking screed shoe to make sure that all the marked lined are tidy, thick-even great edge finish.

4,  Floor-type cutter can adapt to any roads with different situations.

5,  Glass beads automatic spreader is equipped with flow control device

Technical parameters

1,Coating bucket:65L

2,Glass beads box capacity:12L

3, Glass beads spreader:Synchronous linkage spreading, equipped with a flow control device

4, Marking hoppers:High precision ultra-thin material, scraping type structure.

5,Marking width:  100/150/200/300/400/450mm

6,Heating method: Liquefied petroleum gas

7,Boundary dimension(mm): 1260(L)*890(W)*1050(H)

8,Weight  145kg                                                                                                                                                                                                   

FEATURES

The ThermoLazer ProMelt unit is your solution for first-time stripers wanting to get into the highly profitable thermoplastic marking business, as it lets you avoid the additional costs of adding a premelt kettle truck or trailer, thus saving you time and labour, resulting in more money in your pocket. Graco's breakthrough technology allows you to melt 135 kg of thermoplastic on board in less than an hour.

• ProMelt Technology
  • The 4 chamber melting system offers more surface area to melt thermoplastic quickly
  • With 100000 BTU's the melt time is faster resulting in more finished jobs every day
• SmartDie II System
  • Fast change-out system - Hardened steel dies with a built-in mil thickness adjustment system
  • Use with or without heat - Allows you to optimise your striping in all weather conditions
  • "Floats" with the surface - Puts the thermoplastic where you want it for superior line quality
  • External heat system - 4-Torch die heat system keeps it hot
• 135 kg Material Kettle
  • Easy-to-fill kettle with PaddleMax Dual mixer for improved mixing
• 40 kg Split Bead Hopper System
  • Perfectly matched to the material kettle with a superior flow design
  • No-tool system allows fast and easy line width changes
• Ease-Z-Steer Handle Bar System
  • Makes turning and handling as simple as a LineLazer system
  • Adjustable handle bar for users of all sizes
• Bead Dispense System
  • No-tool system allows fast and easy line width changes
  • 30 cm dispenser with 2.5 increments allows you to "dial-in" the drop rate
• Ergonomic Design
  • Easier to use and almost effortless to push/pull, just like the proven LineLazer design
• Optional LineDriver System
  • Double your striping productivity and get straighter lines with less fatigue
  • Move between jobs without having to push
  • Patented Dual Pedal System - Multiple positions allow for simple forward and reverse

FEATURES

The Graco LineDriver ES is the quietest, most innovative, user-friendly ride-on system. Simply connect the LineDriver ES to your LineLazer ES striper to double your striping productivity on any indoor or outdoor job without the engine noise, vibration or fumes.

The Industry’s First Electric Battery-Powered LineDriver. High-speed production efficiency with a 10 mph maximum speed and an 8 hour run time to finish jobs faster.

• New High-Capacity Batteries
  • Quiet, All-Day Reliable Power
  • Four, 6-volt Sealed Lead-Acid 225 Ahr AGM Batteries
• ExactMil Speed Control
  • Consistent Mil Thickness
  • Set your speed for guaranteed perfect lines every time
  • Speed Boost Mode allows for faster speeds between lines to increase your productivity
• SmartDrive Technology with Advanced Eco-Mode
  • Superior Control & Extended Run-Time
  • Performance and feel of a gas-powered LineDriver
  • Regenerative braking recharges batteries to extend run-time
  • Eco-Mode allows for 12 full hours of run time and precise control at low speeds
• On-board 24V Charger
  • Simple, Plug-in Charging
  • Longer battery life with extended battery-tender feature
• Dedicated 12-Volt Power Supply
  • Easy Accessory Charging
  • Dual “cigarette lighter” power supplies for all your accessories
  • Dual LED light outputs
• Battery Monitor System
  • Quick-View Power Level
  • Displays battery level for easy recall
  • Alerts user when battery is low and requires a recharge
• Back Rack Storage Shelf
  • On-Hand Storage
  • Convenient storage for on-the-job supplies

Product Specification

The Graco ThermoLazer 300TC Features:

• EasyGlide Wheel Mount System
  • Front mounted caster along with dual rear pneumatic air-filled tires makes handling safe and as easy to maneuver as a LineLazer striper
• Tri-Flame Die Heat System
  • Reliable, safe system to keep die ready to use
• Bead Dispense System
  • No-tool system allows fast and easy line width changes
• Split Bead Hopper System
  • Split hopper holds over 90 lb of beads
  • Simple conversion to double drop bead system with optional kit
• FatTrack Front Swivel Wheel
  • Proven front caster wheel system makes turning fast and easy
  • Maneuver curves better
  • No need to “muscle” it while moving

Optional LineDriver System

LineDriver and LineDriver HD Systems adaptable for the ThermoLazer 300TC System.

• Get higher productivity and straighter lines with less fatigue
• Move between jobs without having to push
• Dual Pedal System—multiple positions allow for simple forward and reverse

The Graco ThermoLazer Promelt Features:

• QuadMelt System - Four chamber system can melt 300 lbs of material in less than 1 hour.
• ControlFlow System - Precise material flow control with a squeeze of a lever.
• SplitBead Hopper - Holds over 90 lbs (40 kg) of reflective glass beads.
• EasyGlide System - First thermoplastic line striper with dual rear wheels and Fat Track Front Swivel for smooth LineLazer-like handling.
• SmoothRide Tires - High-load pneumatic tires provide excellent maneuverability and less rolling resistence.
• Optional Double-Bead Drop System Kit: installs in minutes for superior retroreflectivity.

Ride-on option:

Why walk when you can ride! Attach a Graco LineDriver@4.95 Lakh to the Thermolazer and:

• Improve production
• Reduce fatigue
• Achieve higher line quality
• The industry's first ride-on compatible handliner

Product Specification

Product Specification

Specification

Specification

Specification

Specification